Hunan Sanchang Pump Co., Ltd. is one of the most reliable manufacturers and suppliers of mdk series api 610 bb3 horizontal split case multistage pump in China. If you're going to buy high efficiency mdk series api 610 bb3 horizontal split case multistage pump made in China, welcome to get pricelist from our factory. All customized products and OEM&ODM products are with high quality and competitive price.
Overview – API 610 BB3 Pump
The MDK Series API 610 BB3 horizontal split case multistage pump is a heavy-duty centrifugal pump developed by Hunan Sanchang Pump Co., Ltd. It features an axially split casing, a between-bearings rotor, and a back-to-back impeller arrangement to balance axial thrust.
As an API 610 BB3-type pump, the MDK series combines high-head performance with convenient maintenance. Its wear-resistant construction, optimized hydraulic design, and balanced rotor ensure reliable operation in demanding conditions involving high temperatures, corrosive liquids, and abrasive media.
It is suitable for mine dewatering, crude oil transportation, brine transfer, process feeding, and offshore water injection, where high pressure, stable performance, and easy maintenance are essential.

Key Technical Parameters
| Parameter | Specification |
|---|---|
| Pump Series | MDK |
| Pump Type | Horizontal split case multistage centrifugal pump |
| API Configuration | BB3 |
| Flow Rate | 20–2,500 m³/h |
| Total Head | 60–1,200 m |
| Fluid Temperature | –40°C to +200°C |
| Design Pressure | Up to 16 MPa |
| Rotational Speed | 1,480 / 2,980 rpm |
| Impeller Arrangement | Back-to-back symmetrical |
| First-Stage Impeller | Single-suction or double-suction, depending on configuration |
| Solid Content | Up to 3%, subject to media characteristics |
| Design Standards | API 610 |
Final pump performance, material selection, sealing arrangement, and operating limits are subject to the selected model and project requirements.
Materials and Material Options
The MDK Series API 610 BB3 horizontal split case multistage pump offers multiple material configurations to accommodate different operating conditions, including abrasive, corrosive, and high-temperature applications.
Material selection covers the pump casing, impellers, shaft, pump casing wear rings, and impeller wear rings. Different material combinations are available to meet specific requirements for corrosion resistance, wear resistance, and operating conditions.
|
Components |
I-1 |
S-4 |
S-6 |
C-6 |
A-8 |
D-1 |
|---|---|---|---|---|---|---|
|
Pump Casing |
QT500-7 |
ZG230-450 |
ZG230-450 |
ZG12Cr13 |
ZG0Cr18Ni12MoS |
Duplex Stainless Steel |
|
Impellers |
QT500-7 |
ZG230-450 |
ZG230-450 |
ZG12Cr13 |
ZG0Cr18Ni12MoS |
Duplex Stainless Steel |
|
Shaft |
40Cr |
42CrMo |
42CrMo |
30Cr13 |
30Cr13 |
Duplex Stainless Steel |
|
Pump Casing Seal Ring |
QT500-7 |
QT500-7 |
ZG12Cr13 |
ZG12Cr13 |
ZG0Cr18Ni12MoS |
Duplex Stainless Steel |
|
Impeller Seal Ring |
QT500-7 |
QT500-7 |
20Cr13 |
20Cr13 |
ZG0Cr18Ni12MoS |
Duplex Stainless Steel |
Note: Material configurations are selected according to the pumped medium, temperature, pressure, and wear conditions. Customized material combinations are available upon request.

Model Description – MDK 200-100×8
The MDK model designation identifies the pump series, rated flow, single-stage head, and number of stages.
| Code | Description |
|---|---|
| MDK | Wear-resistant horizontal split case self-balancing multistage centrifugal pump |
| 200 | Rated flow rate: 200 m³/h |
| 100 | Single-stage head: 100 m |
| 8 | Total number of stages: 8 |
For example, MDK 200-100×8 represents a pump with a rated flow of 200 m³/h, a nominal head of 100 m per stage, and eight stages.
Design Features of MDK Series BB3 Pump
1. Back-to-Back Impeller Arrangement – Self-Balancing Axial Thrust
The MDK pump adopts a symmetrical back-to-back impeller arrangement. Impellers are installed in opposing directions, allowing the axial forces generated by different impeller groups to counteract each other.
This design reduces the residual axial thrust acting on the rotor and minimizes the load on thrust bearings. Compared with conventional multistage configurations relying on a balance disc, the self-balancing arrangement helps reduce wear-related maintenance and supports stable long-term operation.
The first-stage impeller can be configured as single-suction or double-suction according to hydraulic requirements.

2. Horizontal Axially Split Casing – Easier Maintenance
The pump casing is horizontally split along the shaft centerline, with the suction and discharge nozzles positioned below the shaft centerline.
When maintenance is required, the upper casing can be removed to access and withdraw the rotor assembly without moving the motor or disconnecting the inlet and outlet piping.
Bearing and mechanical seal maintenance can also be performed without dismantling the pump casing or baseplate, reducing maintenance work and equipment downtime.
3. Double Volute Design – Reduced Radial Forces
The double volute discharge chamber helps balance radial hydraulic forces acting on the rotor.
Combined with symmetrical transition passages, this design reduces radial loading, shaft deflection, and alternating mechanical stress, contributing to smoother operation and longer component life.
4. Optimized Hydraulic Design – High Efficiency and Stable Performance
The hydraulic design uses advanced hydraulic models and CFD simulation to optimize the matching between impellers and casing passages.
The optimized flow passages, impeller clearances, and volute geometry help improve hydraulic efficiency, widen the high-efficiency operating range, and enhance cavitation performance.
A semi-spiral suction chamber with an extended pre-rotation section further improves inlet flow conditions.
5. Wear-Resistant Construction – Extended Service Life
The casing wall thickness is designed to meet the specified pressure requirements while allowing additional corrosion allowance.
Material selection can be adapted to the pumped liquid, temperature, and wear conditions. This makes the MDK series suitable for selected abrasive, corrosive, and high-pressure industrial services.
6. Rigid Rotor and Shaft Design – Reduced Vibration
The rotor is assembled as a rigid unit, with the rotating components dynamically balanced to minimize vibration caused by unbalance.
The impeller keyways are distributed alternately at 120° intervals around the shaft circumference to reduce their impact on shaft rigidity. A tapered shaft extension also simplifies coupling installation and removal.
7. Flexible Bearing and Cooling Configurations
Depending on operating loads and project requirements, the MDK pump offers three bearing arrangements:
Rolling radial bearings with rolling thrust bearings
Sliding radial bearings with rolling thrust bearings
Combined radial and thrust sliding bearings
The lubrication system uses oil lubrication. Cooling options include natural cooling, air cooling, water cooling, and forced oil circulation through an oil station.
Under rated operating conditions, the bearing service life is designed to exceed 25,000 hours.
8. Mechanical Sealing and Monitoring Systems
The pump can be equipped with mechanical seals or packing seals, selected according to the pumped medium, temperature, pressure, and operating environment.
Mechanical seal flushing and leakage protection systems can be configured to suit different operating conditions. The balancing pipeline connects the high-pressure-end chamber with the suction end to help regulate pressure in the high-pressure mechanical seal chamber.
Optional monitoring arrangements include:
Temperature monitoring at the front and rear bearings and pump casing
Vibration monitoring at both bearing positions
Mechanical seal leakage monitoring

Typical Industrial Applications
The MDK Series API 610 BB3 pump is designed for high-head and demanding industrial fluid transfer duties.
Mining and Mineral Processing
- Mine dewatering and underground drainage
- Hydraulic coal mining
- Brine extraction and transportation
Oil and Petrochemical Industry
- Crude oil pipeline transportation
- Process liquid feeding
- Offshore platform water injection
Power and Water Treatment
- Reverse osmosis feed water supply
- Power recovery systems
- High-pressure industrial water transfer
Coal Chemical and Metallurgical Industry
- Coal chemical washing tower water supply
- High-pressure descaling systems
- Industrial process circulation
The actual suitability of the pump depends on liquid properties, solids size, concentration, operating pressure, and the required hydraulic duty.
Drive and Installation Options
The MDK pump is driven directly by the motor through an extended diaphragm coupling. Other drive configurations can be provided according to project requirements.
For complete pumping systems, the pump and driver can be mounted on a common steel baseplate with an accessible coupling guard. Skid-mounted packages integrating the pump, motor, and control system are also available.
These configurations simplify transportation, installation, and integration into existing industrial pumping systems.
Customization and Engineering Support
Hunan Sanchang Pump provides pump configurations based on actual operating conditions and project specifications.
Available customization options include:
- Casing, impeller, and shaft material selection
- Single-suction or double-suction first-stage impeller
- Mechanical seal type and flushing arrangement
- Bearing type and cooling configuration
- Lubrication and monitoring systems
- Motor, coupling, and skid-mounted installation
Our engineering team can assist with pump selection, hydraulic performance evaluation, material configuration, and complete pumping system design.
Frequently Asked Questions
Q: 1. Is the MDK Series a BB3 pump under API 610?
A: The MDK Series adopts the horizontal axially split, between-bearings, multistage configuration associated with API 610 BB3 pumps. Its back-to-back impeller arrangement provides self-balancing axial thrust. The applicable API 610 edition and compliance scope should be confirmed for the specific project and supplied configuration.
Q: 2. What is the difference between the MDK BB3 pump and a conventional multistage pump?
A: The MDK BB3 pump combines an axially split casing with a symmetrical back-to-back impeller arrangement. This reduces residual axial thrust while allowing rotor access by removing the upper casing, without disconnecting the main pipelines or moving the motor.
Q: 3. Can the MDK pump handle abrasive or corrosive liquids?
A: Yes. The pump can be configured with suitable wear-resistant and corrosion-resistant materials for selected abrasive or corrosive media. The maximum solids content is up to 3%, subject to particle size, hardness, liquid properties, and operating conditions.
Q: 4. What information is needed to select an MDK BB3 pump?
A: To recommend a suitable configuration, please provide:
- Required flow rate (m³/h)
- Total head (m)
- Pumped liquid and solid particle content
- Operating and design temperature
- Operating and design pressure
- Site conditions and installation requirements
Our engineers can evaluate the operating conditions and recommend a suitable pump model, material configuration, and sealing system.
Hot Tags: mdk series api 610 bb3 horizontal split case multistage pump, China mdk series api 610 bb3 horizontal split case multistage pump manufacturers, suppliers, factory, boiler feed water pump, high head self balancing pump, horizontal multistage pump, multistage boiler feed pump, self balancing multistage centrifugal pump, self balancing multistage pump



