Article

Horizontal Split Casing Pump vs End Suction Pump

Nov 18, 2026Leave a message

When selecting a centrifugal pump for an industrial water supply, cooling water system, or process application, two common options are the horizontal split casing pump and the end suction pump.

Both are widely used in industrial fluid transfer, but they differ in casing construction, impeller configuration, hydraulic performance, and maintenance requirements.

Understanding these differences helps engineers and purchasing managers choose a pump that meets actual operating conditions while controlling installation and lifecycle costs.

1. What Is the Difference Between a Horizontal Split Casing Pump and an End Suction Pump?

The main difference lies in their casing design and liquid entry arrangement.

A horizontal split casing pump, also called a horizontal split case pump, typically uses a double-suction impeller. Liquid enters the impeller from both sides, while the pump casing is divided horizontally along the shaft centerline. This design provides balanced hydraulic loading and convenient access to the rotor assembly.

 

Single-Stage Double-Suction Split-Case Pump

 

An end suction pump draws liquid into one side of the impeller through an axial suction nozzle and discharges it through a radial outlet. Many industrial end suction process pumps use a single-stage, overhung impeller design.

The two configurations serve different operating requirements rather than representing a simple difference in pump size.

2. Horizontal Split Casing Pump vs End Suction Pump: Key Differences

Comparison

Horizontal Split Casing Pump

End Suction Pump

Suction arrangement

Usually double suction

Single suction

Casing design

Horizontally split casing

Volute casing, generally non-axially split

Impeller

Double-suction impeller

Single-suction impeller

Axial thrust

Largely balanced by double-suction design

Managed by hydraulic design and bearing arrangement

Flow capacity

Well suited to large-flow applications

Available for small to large flow requirements

Head range

Commonly low to medium head

Available across a wide range of head requirements

Maintenance

Upper casing can be removed for rotor access

Pull-out designs allow internal maintenance without moving main pipelines

Typical applications

Water supply, cooling water, irrigation and pumping stations

Chemical processing, industrial fluid transfer and general process services

Actual performance depends on the selected pump model, impeller design, rotational speed, and operating conditions.

 

End Suction Pump

 

3. Structural Design and Operating Performance

Double-Suction Impeller vs Single-Suction Impeller

The horizontal split casing pump uses a double-suction impeller, allowing liquid to enter from both sides. This increases the available inlet area and makes the design suitable for handling large flow rates.

The symmetrical hydraulic arrangement also helps balance axial thrust, reducing the load on the thrust-bearing system under normal operating conditions.

By comparison, an end suction pump uses a single-suction impeller. Hydraulic forces are managed through its impeller, wear-ring, and bearing design. Its configuration is widely used in industrial process systems where installation flexibility and fluid compatibility are important.

Split Case Pump Structure

Flow Rate, Head and Suction Performance

Horizontal split casing pumps are commonly selected for large-volume water transfer at relatively moderate heads. Their double-suction configuration can also provide favorable suction performance when properly designed for the available NPSH.

However, an end suction pump should not automatically be considered a low-flow pump. Sanchang's OH1 chemical process pump, for example, has a rated product range of up to 2,100 m³/h and a maximum head of 250 m.

Therefore, engineers should compare actual performance curves, NPSHr, and operating points rather than selecting a pump based only on its structural category.

End Suction Pump Construction

4. Maintenance, Installation and Operating Costs

Maintenance access is one of the main advantages of a horizontal split casing pump.

Its casing can be opened along the horizontal centerline, allowing technicians to inspect or remove the rotor assembly without disconnecting the main suction and discharge pipelines. This is particularly useful for large pumping stations where pipeline dismantling can increase maintenance time and downtime.

End suction pumps generally have a more compact construction and require less installation space. For pull-out designs such as Sanchang's OH1 series, the suspension assembly can be withdrawn for inspection and maintenance without moving the inlet and outlet pipelines.

From a purchasing perspective, the initial equipment price is only one consideration. Installation requirements, spare parts, maintenance access, energy consumption, and expected service life should also be included in the total cost of ownership.

5. Typical Applications: Which Pump Should You Choose?

Choose a horizontal split casing pump when:

Large flow rates are required for municipal water supply or water transfer.

Continuous cooling water circulation is needed in power plants and industrial facilities.

Irrigation, drainage, or water conservancy projects require high-volume pumping.

Convenient rotor access and reduced pipeline dismantling are important maintenance considerations.

Choose an end suction pump when:

The application requires a flexible single-stage process pump.

Chemical compatibility, operating temperature, and sealing arrangements are important.

Installation space and equipment configuration need to be considered.

The process requires a pump designed for specific industrial media, including corrosive or high-temperature liquids.

For petrochemical and chemical applications, an API 610 OH1 process pump can offer suitable configurations for demanding fluid handling conditions.

6. How to Select the Right Pump for Your Project

Before requesting a quotation, engineers and purchasing teams should prepare the following information:

Flow rate and total head: Specify the required operating point and expected flow variations.

Liquid properties: Provide the medium, density, viscosity, solids content, and corrosiveness.

Operating conditions: Confirm temperature, suction pressure, and available NPSH.

Installation requirements: Consider available space, pipeline arrangement, motor configuration, and maintenance access.

Material and sealing requirements: Select suitable casing, impeller, shaft, and mechanical seal materials according to the medium.

The best pump is not necessarily the one with the highest rated flow or lowest purchase price. It is the one that operates reliably and efficiently under the project's actual conditions.

7. Get a Pump Selection Solution from Sanchang

Hunan Sanchang Pump Co., Ltd. manufactures industrial centrifugal pumps for water supply, power generation, chemical processing, petrochemical, and other demanding applications.

Our product range includes the BB1 axial split case double suction centrifugal pump and OH1 single-stage end suction chemical process pump, with engineering support for pump selection, material configuration, sealing systems, and customized performance requirements.

Whether your project requires a large-flow horizontal split casing pump or an industrial end suction pump, our engineering team can help evaluate the operating conditions and recommend a suitable configuration.

Contact Sanchang Pump with your flow rate, head, medium, and operating conditions to request a technical proposal and quotation.

Send Inquiry